Zippi Rippa control module replacement

The control module manages everything: battery, throttle, motor, the two-speed switch. If a Rippa has lost throttle response, has intermittent power, or is showing an unfamiliar light pattern, the control module is usually the culprit. Replacement is methodical but not difficult — take your time and follow the wiring carefully.

What this guide covers

• Removing the battery and confirming no power to the bike
• Locating and accessing the control module on the Rippa frame
• Photographing the wiring before you disconnect anything
• Disconnecting the harness and removing the old module
• Fitting the replacement and reconnecting the wiring
• Powering up and verifying everything works before you close it up

What you'll need

• A replacement control module for your Rippa size — order from spares and accessories
• Allen keys (included with your original bike)
• Your phone for a reference photo of the wiring
• About 25 minutes

Before you start

The connectors are colour-coded but they're easy to mix up if you're going from memory. A photo of the wiring before disconnection saves a lot of frustration. If anything looks damaged — burnt wires, melted plastic, swollen connectors — stop and email us photos before continuing.

Need more help? Check our full bike manual or contact us with photos — we can usually diagnose remotely before you order parts.