Setting up the side stand for the Zippi Rippa 16" Bike

Once a kid is riding a Rippa 16" everywhere, a side stand is the difference between a bike that lives on the lawn and a bike that lives standing up. Fitting one takes about five minutes.

What this guide covers

• What's in the side stand kit
• Locating the mounting point on the Rippa 16" frame
• Fitting the stand and bolts
• Adjusting the angle so the bike sits stably on a slight lean
• Tightening to the right torque

What you'll need

• The Rippa 16" side stand kit — available from spares and accessories
• An Allen key (included with the kit, and in your original bike box)
• About 5 minutes

Tip

Tighten the mounting bolt firmly but don't go monster-grip on it — over-tightening can damage the bracket. The stand needs to hold the bike's weight, not survive a wrench-off.

Need more help? Check our full bike manual for the Rippa 16" or contact us if the kit is missing a part.