accessories
Adding training wheels to the Zippi 12" Rippa
Training wheels for the Rippa 12" — what you need, how to fit them, and when your kid is ready to take them off.
Some kids hit the Rippa 12" already balanced — others want a confidence boost. Training wheels are a sold-separately accessory for the Rippa 12", and they fit in about five minutes.
What this guide covers
- What's in the training wheel kit
- Fitting the brackets to the rear axle
- Setting the right height so both wheels just brush the ground
- Tightening properly so they don't loosen mid-ride
- When to remove them
What you'll need
- The Rippa 12" training wheel kit — available from spares and accessories
- A spanner — included with the kit
- About 5 minutes
When to take them off
Training wheels are a confidence tool, not a permanent fixture. When you see your kid riding with the trainers barely touching the ground, leaning into corners, and not relying on them to stay upright — that's the signal. Take them off, watch them ride, put them back on if they're not quite ready. No harm done.
Need more help? Check our full bike manual for the Rippa 12", or contact us if a part is missing.